Vortex Sonora 4-12x44 Riflescope w/ Dead-Hold BDC Reticle & Vortex Cantilever Ring Mount For 1" Tube with 2" Offset

More Views

Vortex Sonora 4-12x44 Riflescope w/ Dead-Hold BDC Reticle & Vortex Cantilever Ring Mount For 1" Tube with 2" Offset

SKU#KIT-0380

Availability: In stock

$ 149.99

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

SKU: KIT-0380
UPC:
MFR#:

 


SKU: 5165490517
QTY: 1


SKU: 506424
QTY: 1

Add To:

Details

Vortex Sonora 4-12x44 Riflescope w/ Dead-Hold BDC Reticle

The Vortex Sonora redefines what a rifle scope can do. The Sonora combines fully multi-coated lenses for a clear sight picture with generous eye relief. The Sonora also features a hard-anodized, single-piece, aircraft-grade aluminum tube that is nitrogen purged and O-ring sealed that delivers a waterproof, fogproof, weatherproof performance no matter the weather.

Features:

  • Anti-reflective lens coatings increase light transmission for greater clarity
  • Gas purged and o-ring sealed delivering waterproof and fogproof performance
  • Waterproof performance designed to withstand harsh weather conditions
  • The shockproof, rugged construction withstands the highest levels of recoil and impact

 

Specifications: 

  • Reticle: Dead-Hold BDC
  • Tube Size: 1"
  • Length: 13.5"
  • Weight: 15.8 oz.
  • Eye Relief: 4"
  • Field of View: 24.7'-8.4' @ 100 Yard
  • Adjustment: 1/4 MOA
  • Travel Per Rotation: 15 MOA
  • Total Windage Travel: 60 MOA
  • Total Elevation Travel: 60 MOA

 

Vortex Cantilever Ring Mount For 1" Tube with 2" Offset 

Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style AR-15 rifles. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15. Aluminum contruction.

Features:

  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base.

 

Specifications:

  • Model: CM-102
  • Mount Style: Cantilever
  • Offset: 2"
  • Rings: 1"
  • Weight: 6.7 oz.
  • Ring Screw Torque: 16 inch/lbs
  • Base Screw Torque: 20 inch/lbs
Additional Information
SKU KIT-0380
Department Kit/Combo
Brand Vortex
Daily Deal No
Daily Deal Expires No
Unit Price No
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 18 questions Browse 18 questions and 15 answers
Up to what caliber is this rated
for?
Baraco on Sep 6, 2019
Never heard of sonora model can you explain ?
payton v on Sep 7, 2019
BEST ANSWER: Looks like it is their Cpooerhead CPH-412 model as has the exact same specs. Name change possible due to combined with the mount and for ability to sell at a lower pricing.
Will this hold up to 12 gauge recoil on a break action 12 gauge shotgun?
Jeff P on Sep 6, 2019
BEST ANSWER: You're kidding right???Enter
Will this clear a Magpul rear site in the folded position?
Brent S on Sep 7, 2019
BEST ANSWER: Do you mean sight? Yes, buy you will have to remove four star head (not torx, not hex) screws in order to remove the scope and used the blocked sights. By that time you will be a mall ninja full of holes. Perhaps you should considered off set backup sights. They were invented more than a decade ago.
Will this scope and mount be good for hunting deer on an AR platform in 300 blackout?
Casey C on Sep 6, 2019
BEST ANSWER: Yes it will perform as designed. You will need to figure the bullet drop when sighting in to determine the cirrect drop for the reticle..
What focal plane is this and is it good for 308?
Paul M on Sep 8, 2019
BEST ANSWER: It's a second focal plane. Should do just fine with .308.
What isnthe purpose of the red flags?
James H on Sep 8, 2019
BEST ANSWER: I believe it's palmetto state's way of protesting against red flag laws that are being proposed.
Does this scope have paralex adjustment ? If not what is the paralex set for ?
Oldawg on Sep 9, 2019
BEST ANSWER: Based on the copperhead information out there, and the premise this is a copperhead “rebranded” the parallax is set at 100 yard.
Will this work with a .450 bushmaster?
Steven W on Sep 7, 2019
BEST ANSWER: That is a lot of magnification for a short range caliber. Especially, if you are hunting in timber. I run a 2-7×35 on mine. The lower magnification allows you to get on deer quickly. You can always turn it up if they are farther out. Even at 4 power in thick brush it is hard to find deer.
I have a 1979 Remington speedmaster 22cal. will this scope and mount work good one my rifle?
Mark W on Sep 10, 2019
BEST ANSWER: no
Any problem with using this scope with the Ruger.22 precision rimfire?
David J on Sep 10, 2019
BEST ANSWER: no
Can it works good on an AR 15 for 100 to 300 yards? And Thank you.
Raypupi15 on Sep 8, 2019
BEST ANSWER: Sure will! Buy it and see!
Will the 2" off set be enough to see over the front post sight of an Ar-15?
Randy K on Sep 14, 2019
Will this mount on a picatinny rail ?
Rick H on Sep 12, 2019
BEST ANSWER: yes
Will this handle a 338 lapua?
Chris Y on Sep 16, 2019
Does it come in left handed ?
Gregg F on Sep 15, 2019
What Butler Creek flip-up scope caps will fit this?
Brian B on Sep 15, 2019
Will this work for a 30-30 marlin 336 lever action?
Austin E on Sep 14, 2019

Reviews

There are no reviews for this item. Write Review