PSA Custom AK-AR Buffer Tube Adapter - 116034

More Views

PSA Custom AK-AR Buffer Tube Adapter - 116034

TEMPORARILY OUT OF STOCK

Quick Overview

SKU: 116034
UPC: 810022572900
MFR#: 116034
  • Platform: Most AK firearms
  • Material: 6061 Aluminum
  • Finish: Type 3 Hardcoat Black Anodize

Add To:

The Palmetto State Armory AK-AR buffer tube adapter is used to give AK Platform firearms the ability to take advantage of more modernized stock options. The adapter works with most AK’s and all AR style buffer tubes. Made in the USA with an unconditional lifetime warranty.

SKU: 116034
SKU 116034
Department AR Parts
Brand PSA Custom
Daily Deal No
Daily Deal Expires No
Unit Price N/A
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 116034

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 12 questions Browse 12 questions and 8 answers
Can I use this on a pistol build?
Dan Z on Mar 15, 2019
BEST ANSWER: Then why does sb braces come with mil spec buffer tubes??? 🤷‍♂️
Does anyone have one of these? is it straight out (like DArms & Krebs) or does it slant down (like RDynamics & Tapco)?
Jaime D on Apr 11, 2019
BEST ANSWER: Does not slant down like the Tapco, also shortens LOP by about an inch.
Does it work on the PSAK GF3?
guardian on Mar 19, 2019
BEST ANSWER: I have one on mine. So yes
Is this compatible with a straight back receiver MAK-90?
Paul J on Apr 6, 2019
BEST ANSWER: Just recieved mine. It will NOT fit MAK-90. The rear trunion sits too low to allow it to slide into the receiver. Works wonderfully on romanian AK.
Is this the rear trunnion found on the AK-P?
Sean on Apr 16, 2019
BEST ANSWER: Yes
Why is this not made from 7075 T6 aluminum like all structural components should be?
Michael H on Jun 16, 2019
What material is this made of?
Brennan H on Jul 21, 2019
BEST ANSWER: 6061 aluminum
Does this work on the PSK AK-V if I bought the side folder brace version and wanted to add a buffer tube and pistol brace?
Wilson on Jul 8, 2019
BEST ANSWER: It should work just fine. I used it on a vepr 308 with a slant back. It wasn’t exactly straight, so I used 2 small washers as shims under the screw. It was perfect. I can’t imagine anything other than slight modification.
Will this fit the century arms ras47?
Charlie on Jul 4, 2019
Will this fit the century arms RAS47?
Charlie on Jul 4, 2019
Does this work with the Magpul ASAP sling attatchmend??
Reese on May 28, 2019

Reviews

5.0 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
My put this on a ak74 aims.It didnt fit so I had to mill the sides and the bottom where it bolts the thrid bolt hole after that it worked.I also made a 16gauge small plate for this hole for a better hold blue locktite its strong
User submitted image
User submitted image
User submitted image
July 6, 2019
Purchased
3 months ago
Went on with no issues, good material
Went together very easy, would work on most AK systems on the market. Would buy again
June 17, 2019
Purchased
3 months ago
Great in every way
arrived today. mounted and tested. fit and finish are terrific. straight back with no slant. solid mount built like a tank.
June 12, 2019
Purchased
2 months ago
Fixed a sloppy stock
Good high quality part. I got this because I couldn’t get any other stock to not work it’s way loose while shooting. This part bolts on securely and is very rigid once bolted on. Better connection than the tapco and magpul stocks by a factor of ten. The only issue I have with it is that it changed the height of my check weld, which required a new higher mount for my red dot. But I guess that’s to be expected when putting an AR stock and tube on an AK. My AK is a 16”er, but this would work great with a brace like the SBA3 if you’re running a pistol or firearm variant.
May 12, 2019
Purchased
5 months ago
Quality construction.
Rock solid. Easy install. Way better than the old plastic crappy one I was using before.
User submitted image
User submitted image
May 7, 2019
Purchased
3 months ago