PSA 8" CHF Pistol-Length 300AAC Blackout 1/8 9" Lightweight M-Lok MOE EPT SBA4 Pistol Kit w/NiB BCG

More Views

PSA 8" CHF Pistol-Length 300AAC Blackout 1/8 9" Lightweight M-Lok MOE EPT SBA4 Pistol Kit w/NiB BCG

TEMPORARILY OUT OF STOCK

Quick Overview

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165458550
UPC: 5165458550
MFR#: 5165458550
  • Barrel Length: 8"
  • Gas System: Pistol-Length
  • Barrel Profile: Heavy
  • Barrel Steel: Cold Hammer Forged Chrome Moly Vanadium
  • Barrel Finish: Phosphate
  • Chrome Lining: Yes, bore and chamber
  • Muzzle Thread: 5/8-24
  • Chamber: 300AAC Blackout
  • Twist Rate: 1:8
  • Barrel Extension: M4
  • Diameter at Gas Block: .750
  • Gas Block Type: .750 Low Profile 
  • Muzzle Device: PSA Fluted Flash Can
  • Receiver Material: Forged 7075 T6
  • Receiver Type: M4
  • Handguard Type: PSA 9" Lightweight M-Lok Rail
  • Bolt Carrier Group Included: Yes, ToolCraft Nickel Boron
  • Bolt Steel: Carpenter 158, Nickel Boron
  • Bolt Carrier Profile: Full-Auto
  • Charging Handle Included: Yes
  • Build Kit: PSA MOE EPT SBA4 PIstol Kit

Add To:

Barrel: Barrel is made for Palmetto State Armory by FN Manufacturing using their proprietary blend of hammer forged chrome molly vanadium that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 300AAC Blackout, with a 1:8 twist, M4 barrel extension with extended feed ramps, and a pistol-length gas system. This barrel is Mil-spec phosphate coated, and MPI/HPT tested. The upper is finished off with a  .750" low profile gas block, Palmetto State Armory 9" Lightweight Free Float Rail, and a PSA Fluted Flash Can.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability.  These uppers are made for us right here in the USA by a mil-spec manufacturer.

Flash Can: Palmetto State Armory's Fluted "FLASH CAN". This is a solid 6061 aluminum device that is designed to direct muzzle gases and the muzzle flash forward. Threaded 5/8-24 for 300AAC. Black military-style hard anodizing. THIS DEVICE IS NOT DESIGNED TO REDUCE RECOIL, MUZZLE RISE, OR FLASH SIGNATURE. This device is designed to direct gasses and noise forward away from the shooter and enhance the weapon's appearance.

Bolt Carrier Group: ToolCraft nickel boron BCG has a bolt made of mil-spec shot-peened Carpenter 158 steel. Gas key is secured with grade 8 fasteners and staked per mil-spec.

Build Kit: A high quality lower build kit with everything you need to assemble your AR-15 lower into a pistol. Features Enhanced Polished Trigger (EPT), Magpul Grip, Magpul Trigger Guard, and black oxide coated hammer and trigger springs. Also includes an SB Tactical SBA4 Adjustable Pistol Brace, castle nut, latch plate, carbine buffer spring, 5 positioning mil-spec buffer tube, and standard carbine buffer.

SKU: 5165458550
SKU 5165458550
Department Uppers
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price N/A
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165458550

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 6 answers
What is the inner diameter of the m-lok rail? Is the flash can pinned and/or welded?
Noka L on Jun 7, 2019
BEST ANSWER: No, the flash can is not pinned or welded. Why would it be?
Does this come with the Magpul MBUS sight set? It says so in the description but doesn’t show them
Robert H on Jun 6, 2019
BEST ANSWER: This pistol kit does not come with MBUS Sights.
Can this be shipped to Washington State?
DougR on Jun 17, 2019
BEST ANSWER: These are legal in Washington state so it should not be a problem
Is this kit legal in Texas?
James on Jun 13, 2019
BEST ANSWER: Yes
Is this gas block adjustable? Is this a standard mil spec buffer tube?
George B on Jun 7, 2019
BEST ANSWER: The gas block is non-adjustable and the buffer tube is a standard Mil-Spec buffer tube.
Do you have a kit like this chambered in 5.56?
Cristofer M on Jun 25, 2019

Reviews

4.3 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
1
0
0
Brace doesn't fit buffer tube
Overall this seems to be a very good kit. However, the SB4 brace does not fit the buffer tube that was supplied with the kit. The brace was very tight fitting it on the tube. I don't think you could get it on without something breaking. I got it to go on about an inch and had to use a hammer to get it back off. It needs a slightly smaller tube. The brace fits on my Sig MPX pistol buffer tube just fine.
August 16, 2019
Purchased
5 months ago
great pistol, 1/2 group at 100m.
August 16, 2019
Purchased
5 months ago
Good bargain
Solid attractive upper which fired accurately for me . Only negative is the finish can be marred by other metal objects, so don't be clumsy like me. But seriously this as a great deal or the money.
August 7, 2019
Purchased
5 months ago
Excellent!
Great build on an Anderson lower. Run 100+ rounds mixed loads from 88 gr to 200 gr through it with no issues!! Well worth the price. JET
July 6, 2019
Purchased
4 months ago